SIMATIC WinCC V7 is PC operation monitoring and control software to visualize and operate lines, production processes, machines and plants in all areas – from simple single-user stations to multi-user distributed systems with redundant servers and web-based remote monitoring solutions. WinCC serves as the system-wide vertically integrated information hub.
WinCC V7.5 SP2 is the final version of WinCC V7 Series that updates the latest and most modern features of Siemens.


Operating Systems
+ Windows 11 All Versions (64-Bit)
+ Windows 10 Professional, Enterprise (64-Bit)
+ Windows 10 LTSB 2015/2016, LTSC 2019 (64-Bit)
+ Windows Server 2016 (64-Bit)
+ Windows Server 2019 (64-Bit)
System Requirements
+ CPU: Multi-core at 3.5GHz or higher
+ RAM: 8 GB minimum
+ DISK: 15 GB
+ Resolution: 1920 x 1080 (Full HD)

Software Installation Guide
+ Step 1: Install WinCC V7.5 Software >>> Done
+ Step 2: Install the updated version WinCC V7.5 SP2
The Service Pack will be supplied as a split WinZip archive. Download the five files to a directory on your WinCC PC and then execute the “WinCC_V7_5_SP2.exe” file.

(You can install an “Upgrade6 version” if you want after installing WinCC V7.5 SP2 successfully)
+ Step 3: Use “SIM_EKB_Install” software to be able to unlock the WinCC V7.5 SP2
+ Update: Need Installation Automation Licence Manager New Version >>> Download Siemens ALM Latest Version Here
Download Software + Video Tutorial
Download via GoogleDrive 
+ Download WinCC V7.5 Software
+ Download WinCC V7.5 SP2 Update Service
+ Download WinCC V7.5 SP2 Upgrade6 (Unnecessary)
+ Download SIM-EKB-Install + Video Installation Tutorial
Password Extract: plc247.com
If the link is broken, please comment below the article so that plc247.com will fix the link and if you need support, please comment below the article I will reply to you as soon as I read the comments.
Best Regards!
I – Tải project mẫu
Link tải project mẫu (Tia portal V16): Tải về
II – Video hướng dẫn
III – Các bước thực hiện
Bước 1: Tại file “FC1_Common.js” tạo hàm chức năng sửa và lưu dữ liệu
Bước 2: Tại file “FC1_Common.js” tạo hàm chức năng báo đang sửa dữ liệu
Bước 3: Tại file “FC1_Common.js” tạo hàm chức năng báo đang LƯU dữ liệu
Bước 4: Tại file Index.html tạo 2 nút nhấn có tên “Sửa” và “Lưu”
Bước 5: Tạo bảng tag ghi dữ liệu xuống PLC trong file IO.html
Bước 6: Tại folder “CSS” tạo một file css có tên “main_Screen.css” và gọi ra phần header của file “Index.html”
Bước 7: Thêm code CSS cho 2 nút nhấn SỬA và LƯU trong file “main_Screen.css”.
Bước 8: Tại file “FC1_Common.js” sửa lại hàm chức năng đọc lên giá trị tag (code dòng 3)
Bước 9: Tải lại folder Web vào PLC và kiểm nghiệm kết quả